INSTRUCTION MANUAL PORTABLE AIR CONDITIONER 12,000BTU Model No: AM-12A4/R1 FOR FUTURE REFERENCE
CONTENTS Introduction ..................................................................1 Safety Precaution .........................................................2 Technical Specifications...............................................4 Parts Description ..........................................................5 Accessories...................................................................6 Operation.......................................................................7 Installation ...................
Brief Introduction This mobile air conditioner is a new generation air conditioner which is ideal for use in the bedroom, study, lobby, office, meeting room, warehouse, attic, sports hall and other entertainment rooms. Its flexibility enables easy adjustment to a desirable room temperature and humidity. The built-in filter can remove floating dust and purify air to create a healthy working environment.
Safety Precaution Your safety and the safety of others is very important. We have provided many important safety warnings in this manual and on your appliance. Always read and follow all safety warnings. ! WARNING ! CAUTION This symbol indicates the possibility of death or serious injury. This symbol indicates the possibility of injury or damage to properties only. ! WARNING Plug in the power socket properly. Otherwise, it will cause electric shock or fire due to heat generation.
It could cause dust to accumulate on the heat exchanger. Do not put pets or plants where it will be exposed to direct air flow. This could injure the pets or plants. Do not use for special purpose. Do not use this air conditioner to preserve precision devices, food, pets, Plants and art objects. It may cause deterioration of quality etc. Do not apply an insecticide or flammable spray. It may cause a fire or deformation of the cabinet.
Technical Specifications Model Cooling capacity (Btu/h) 3 Air flow (m /h) Rated current (A) Rated input (W) Power supply Refrigerant Weight (kg) Noise dB(A) Dimension(mm) 2 Suitable room area (m ) Note: AM-12A4/R1 12000 330 5.2 1200 1PH 220V-240V~/50Hz R410a 33 53 378 368 838 14-20 The above cooling capacity are calculated at ambient temperature DB 30 , WB 25.4 . . Working temperature range DB Maximum temp. 35 Minimum temp.
Parts Description Top panel Airflow direction vane (horizontal ) Airflow direction vane (vertical ) Air outlet Control panel Right panel Handle recess Water tank Front panel Castors Remote controller FRONT VIEW Rear panel Air inlet Air filter (inside) Exhaust air outlet Cord hanger Left panel Power cord Air intake(condenser) LEFT SIDE VIEW REAR VIEW 5
Accessories Parts Quantity Parts name Duct 1 Adaptor A (for permanent mounting use) 1 Cover (cover the hole when not in use) 1 Adaptor B(for temporary mounting use) 1 Wall plug 4 Screw 4 Alkaline batteries 2 Remote controller 1 Control Panel Timer indicator Mode indicator COOL DRY FAN Fan speed indicator LOW MED Digital display HIGH ON/OFF TIMER ON/OFF FAN MODE SLEEP SWING WATER FULL Sleep indicator Water full indicator UP DOWN Signal receiver 6
Function Buttons SLEEP button Press this button to set the sleep state. TIMER ON/OFF button Press this button to initiate the auto-on or auto-off time sequence . MODE button Each time you push the button, a mode is selected in a sequence that goes from cool, dry and fan. FAN button This button is used for setting fan speed in the sequence that goes from Low Me to Hig then back to Low. SWING button Press the button to change the swing angle of louver.
Circulation operation mode 1) Press the MODE button in a sequence until the fan indicator lights up. 2) Press the FAN button to choose the fan speed (low-med-high) 3) Do not put the duct to the window. 4) Press the ON/OFF button to start the unit and press it again to stop. Timer operation 1) Press the TIMER ON or TIMER OFF button to initiate the auto-on or auto-off sequence. 2) Press the UP or DOWN button to set your desired wait time. Each press will increase or decrease one hour.
Installation Guide of customer The customer should have a qualified power supply coincident with that printed on the tag of the air conditioner. Its voltage should be in the range of 90%-110% of its rated voltage. The customer must use a special circuit and efficient grounding socket to match the plug of the air conditioner. If the supply wire is damaged, it must be repaired by a qualified electrician. Keep the unit upright in order to protect the compressor.
3) Put the end of duct to a nearby window. Permanent 1) Attach one end of the duct to the exhaust air outlet of the mobile air conditioner. According to the arrow direction, first fit the left side of the duct on the exhaust air Amplified view for I panel, then the right side duct. Push it Adaptor A downwards, be sure to fix thoroughly. 2) Install the adaptor A onto the wall by using 4 wall plugs and screws. Wall plugs 3)Attach the other end of the duct to adaptor A.
Window kit installation Your window kit has been designed to fit most standard vertical and horizontal window applications. However, it may be necessary for you to improvise or modify some aspects of the installation procedure for certain types of window. Please refer to fig. A &fig. B for minimum and maximum window openings. Horizontal window Fig. B Fig. A Vertical window Window slide kit minimum:67.5cm maximum:123cm Window slide kit minimum:67.
2) Wipe the unit with a dry cloth . 3) If the unit is very dirty, wet the cloth with cold water . Cleaning drain tank Wash the tank using warm water and a neutral detergent. Rinse and then dry in a cool place. Put the tank in its original place after it has dried completely. Do not use gasoline ,benzene ,thinner or any other chemicals, or any liquid insecticide on the air conditioner, as these substances may cause flaking off of the paint ,cracking or deformation of plastic parts .
Not cooling Causes Mistakes in temperature setting. The air filter is blocked by dust. The air inlet or outlet of machine is blocked. Unit recently turned on in hot room. The doors or windows are open. Solutions Set a proper temperature, see the methods of application. Clean the air filter. Remove the obstruction. Allow additional time to remove stored heat from walls ,ceiling, floor and furniture. Close the doors and windows. Noise or vibration Solutions Causes The ground is not level.
