Instruction manual

2) Install the adaptor A onto the wall
by using 4 wall plugs and screws.
3)Attach the other end of the duct to
adaptor A.
4)Cover the hole using the adaptor
cap when not in use.
I
Max 120cm
Min 30cm
Note: 1.The duct can be compressed to 450mm minimum and extended to
1800mm maximum. It is better to keep the duct length to a minimum.
2.Overstretching or bending the duct will affect the cooling efficiency.
(As the following fig. Show)
Do not!
Amplified view for I
Adaptor A
Wall plugs
Permanent
1) Attach one end of the duct to the exhaust
air outlet of the mobile air conditioner.
According to the arrow direction, first fit
the left side of the duct on the exhaust air
panel, then the right side duct. Push it
downwards, be sure to fix thoroughly.
10
3) Put the end of duct to a nearby
window.