Owner manual

AW58300HTP-PAIR

User’s Manual

PAGE 6

Technical Support (650) 384-0000

www.avalanwireless.com

Changing The Configuration - Step by Step

Please be aware that if you change the IP Address or User Password and forget their new values, you

have locked yourself out of the browser interface. The AW58300 runs self-diagnostics at boot-up and

will auto-correct most system conguration errors. Prior to calling technical support, it is recom-

mended to power cycle the radio and conrm that the problem remains.

In the event of a lost IP address, reboot the AW58300 to create a temporary IP address of 192.168.88.88

that can be used to access the radio to reset the user-dened IP address. This IP address expires after

3 minutes from reboot. In the event of a lost password, please contact AvaLAN technical support for

assistance.

If you are changing parameters over the RF link (we do not recommend this), be sure to make the re-

mote changes rst because the link will be broken if the network name or Security Keys do not agree.

1. Setting the IP Address and Subnet Mask, Gateway and Device Name:

• In the upper right area of the Quick Set page are the data entry boxes for these parameters.

They contain the current values.

• A special notation is used for the IP Address and Subnet Mask: Use /x at the end of the

IP Address to specify the subnet mask: /8 for 255.0.0.0, /16 for 255.255.0.0 and /24 for

255.255.255.0. Enter a new IP Address and subnet making sure you will be able to browse to

the new address with your computer. Also, make sure that the new IP address is unique on your

LAN.

• The Gateway address should be specied if it is necessary to communicate with the radio

through the Gateway. Your system administrator should have this value.

• The Device Name is an arbitrary string and simply allows you to attach a human-friendly name

to this specic radio.

• Click “Apply Conguration” when you have entered new values. Nothing appears to happen, but

you have been disconnected and will need to browse to the new IP Address to login again.