User Guide

Connect the components

Figure 4: Remove the stand cover

2. Connect the AC power adapter (optional). Connect the AC power

adapter (not supplied) to the AC adapter jack in the bottom of the

phone (see Figure 5). Form a small bend in the cable, and then

thread the adapter cord through the channel in the stand base. Plug

the AC power adapter into the nearest AC power outlet.

Note: The Avaya 1110 IP Deskphone supports both AC power and

Power over Ethernet (PoE), including IEEE 802.3af standard power.

To use AC power, use only the Avaya-approved Global Power Supply

(NTYS17xxE6), which must be ordered separately. To use PoE

power, your connected LAN must support PoE. When using PoE, an

AC power adapter is not required.