User guide

Using your IP Phone 1120E
42
Installing additional cables
If applicable, you can plug in an optional USB device such as a USB
mouse or a USB keyboard. Connect the USB cable to the USB port on
the back of the IP Phone
Figure 9: Cable routing tracks and mounting holes
Wall-mounting the IP Phone (optional)
You can mount your IP Phone 1120E on a wall either by: (method A)
using the mounting holes on the bottom of the phone stand or (method B)
using a traditional-style wall-mount box with an RJ-45 connector and 15
centimeter (cm) (6-inch) RJ-45 cord (not provided).
Complete steps 1-7, as needed, before you wall-mount your phone:
Method A
Method B