User Guide
Table Of Contents
- Title page
- Revision history
- Contents
- About the Nortel IP Phone 1140E
- Entering and editing text
- Connecting the components
- Configuring Telephone Options
- Using the Telephone Options menu
- Adjusting the volume
- Adjusting the display screen contrast
- Selecting a language
- Selecting date and time format
- Accessing display diagnostics
- Choosing a local dialpad tone
- Viewing IP Phone information
- Diagnostics
- Configuring call log options
- Choosing a ring type
- Enabling or disabling Call Timer
- Enabling OnHook Default Path
- Changing feature key labels
- Configuring the name display format
- Configuring Live Dialpad
- Configuring Caller ID display order
- Configuring Normal mode indication
- Using the Telephone Options menu
- Configuring Local Menu options
- Making a call
- Answering a call
- While on an active call
- Incoming calls
- While away from your desk
- Talking with more than one person
- Working without interruption
- Additional call features
- Using AutoDial Transfer
- Using the Buzz signal
- Using Call Page Connect to make an announcement
- Using Centrex/Exchange Line Switchhook Flash
- Charging a call or charging a forced call
- Using Enhanced Override
- Using Forced Camp-on feature
- Overriding a busy signal
- Using Privacy Release
- Using Radio Page
- Using Voice Call
- Additional phone features
- Using Hospitality features
- Accessing External Server Applications
- Flexible Feature Codes (FFCs)
- Regulatory and safety information
- Terms you should know
- Index
Connecting the components
32
Figure 7: Cable routing tracks and mounting holes
8. Wall-mount your phone (optional). Your IP Phone 1140E can be
mounted either by: (Method A) using the mounting holes on the
bottom of the phone stand, or (Method B) using a traditional-style
wall-mount box with RJ-45 connector and 15-cm (6-inch) RJ-45 cord
(not provided).
Complete steps 1-7, as needed, before you wall-mount your phone:
Method A: Press the wall-mount lever, and pull the phone away from
the stand, as shown in Figure 5 on page 29. Using the stand cover
(the part you removed in step 1), mark the wall-mount holes by
pressing the bottom of the stand cover firmly against the wall in the
location where you wish to install the phone. Four small pins on the
bottom of the stand cover make marks on the wall. Use the marks as
a guideline for installing the wall-mount screws (not provided). Install
the screws so that they protrude 3 mm (1/8 inch) from the wall, and
then install the phone stand mounting holes over the screw heads.
You may need to remove the phone from the wall to adjust the lower
screws. When the lower screws are snug, install the phone on the