User Guide
Table Of Contents
- Title page
- Revision history
- Contents
- About the Nortel IP Phone 1140E
- Entering and editing text
- Connecting the components
- Configuring Telephone Options
- Using the Telephone Options menu
- Adjusting the volume
- Adjusting the display screen contrast
- Selecting a language
- Selecting date and time format
- Accessing display diagnostics
- Choosing a local dialpad tone
- Viewing IP Phone information
- Diagnostics
- Configuring call log options
- Choosing a ring type
- Enabling or disabling Call Timer
- Enabling OnHook Default Path
- Changing feature key labels
- Configuring the name display format
- Configuring Live Dialpad
- Configuring Caller ID display order
- Configuring Normal mode indication
- Using the Telephone Options menu
- Configuring Local Menu options
- Making a call
- Answering a call
- While on an active call
- Incoming calls
- While away from your desk
- Talking with more than one person
- Working without interruption
- Additional call features
- Using AutoDial Transfer
- Using the Buzz signal
- Using Call Page Connect to make an announcement
- Using Centrex/Exchange Line Switchhook Flash
- Charging a call or charging a forced call
- Using Enhanced Override
- Using Forced Camp-on feature
- Overriding a busy signal
- Using Privacy Release
- Using Radio Page
- Using Voice Call
- Additional phone features
- Using Hospitality features
- Accessing External Server Applications
- Flexible Feature Codes (FFCs)
- Regulatory and safety information
- Terms you should know
- Index
Connecting the components
33
mounting screws, and then tighten the top screws. See Figure 7 on
page 32.
Method B: Attach the 15-cm (6-inch) CAT5e cable, position the stand
over the mounting rivets, and slide the phone down the wall so that
the rivets fit into the slots on the stand, indicated in Figure 7 on
page 32 (Method B).
9. Replace the stand cover. Ensure that all cables are neatly routed and
press the stand cover into place until you hear a click
10. Put the phone in the wall-mount position (optional). If you wall-
mounted your phone, put it in the wall-mount position by holding the
Tilt Lever and pressing the phone towards the base until the phone is
parallel with the base. Release the Tilt Lever and continue to push the
phone towards the base until you hear an audible click. Ensure the
phone is securely locked in position.