User's Manual

Configuring Network Address Translation

308625-14.00 Rev 00

2-57

Using Site Manager

To configure N-to-1 translation, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

NAT

. The NAT menu opens.

4. Choose

Dynamic

. The NAT Dynamic menu opens.

5. Choose

Local.

The NAT Local Address Range List

window opens.

6. Select a local address range from the list. The local address range is highlighted.

7. Set the

Nto1 Address

parameter. Click on

Help

or see the parameter description on

page A-19.

8. Click on

Done

. You return to the Configuration Manager

window.