User's Manual

Configuring Network Address Translation
308625-14.00 Rev 00
2-59
If you enable synchronization without entering a synchronized router ID, the
router automatically inserts the IP address of an existing router IP interface. For
example, in the following series of commands, the IP address of the previously
configured IP interface 197.1.2.3 is used when synchronization is enabled:
nat# info
slot-mask {1 2 3 4 5 6 7 8 9 10 11 12 13 14}
log-mask none
timeout enabled
synch disabled
synch-router-id 0.0.0.0
timeout-max 3600
synch-port 670
synch-idle-timer 120
synch-retransmit-timer 3
synch-retransmit-tries 5
state enabled
nat#
synch enabled
nat# info
slot-mask {1 2 3 4 5 6 7 8 9 10 11 12 13 14}
log-mask none
timeout enabled
synch enabled
synch-router-id 197.1.2.3
timeout-max 3600
synch-port 670
synch-idle-timer 120
synch-retransmit-timer 3
synch-retransmit-tries 5
To set a different value for the synchronized router ID, see “Setting the
Synchronized Router ID” on page 2-60.