User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
2-64
308625-14.00 Rev 00
To reset the keepalive retry count, navigate to the global NAT prompt and enter:
synch-retransmit-tries
<count>
count
is any integer. To configure the router to send only one keepalive message,
enter 0.
For example, the following command sequence resets the keepalive interval to 180
seconds, the keepalive timer to 5 seconds, and the retry count to 3:
nat# synch-idle-timer 180
nat# synch-retransmit-timer 5
nat# synch-retransmit-tries 3
Using Site Manager
To change the default values for the NAT synchronization keepalive mechanism,
complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
NAT
. The NAT menu opens.
4. Choose
Global
. The NAT Base Group Record window
opens.
5. Set one or more of the following
parameters:
Keep Alive Interval
Keep Alive Timer
Keep Alive Retries
Click on
Help
or see the parameter
descriptions beginning on page A-11.
6. Click on
OK
. You return to the Configuration Manager
window.