User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
3-6
308625-14.00 Rev 00
Enabling and Disabling RIPSO
Use Site Manager to enable or disable RIPSO on an interface. When you disable
RIPSO, the router accepts only the following IP datagrams: labeled IP datagrams
with the classification level set to Unclassified and no authority flags set, and
unlabeled IP datagrams.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Interfaces
. The IP Interface List window opens.
4. Click on the interface that you want to edit. Site Manager displays the parameter
values for that interface.
5. Set the
Enable Security
parameter. Click
on
Help
or see the parameter description
on page A-25.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.