User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
3-10
308625-14.00 Rev 00
Setting the Security Level for IP Datagrams
Use Site Manager to specify the minimum and maximum security level that the
router allows for inbound or outbound IP datagrams. The minimum and maximum
security level features specify the range of classification levels that the router will
accept and process. The router drops IP datagrams received on this interface that
are below the minimum and above the maximum levels that you specify.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Interfaces
. The IP Interface List window opens.
4. Click on the interface that you want to edit. Site Manager displays the parameter
values for that interface.
5. Set the following parameters:
Minimum Level
Maximum Level
Click on
Help
or see the parameter
descriptions beginning on page A-27.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.