User's Manual

Configuring RIPSO on an IP Interface
308625-14.00 Rev 00
3-11
Choosing Authority Flags in Outbound Datagrams
Use Site Manager to specify which authority flags must be set, and which
authority flags may be set in the protection authority field of all outbound
datagrams.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Interfaces
. The IP Interface List window opens.
4. Click on the interface that you want to edit. Site Manager displays the parameter
values for that interface.
5. Set the following parameters:
•
Must Out Authority
•
May Out Authority
Click on
Help
or see the parameter
descriptions beginning on page A-28.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.