User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
3-12
308625-14.00 Rev 00
Choosing Authority Flags in Inbound Datagrams
Use Site Manager to specify which authority flags must be set, and which
authority flags may be set in the protection authority field of all inbound
datagrams.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Interfaces
. The IP Interface List window opens.
4. Click on the interface that you want to edit. Site Manager displays the parameter
values for that interface.
5. Set the following parameters:
•
Must In Authority
•
May In Authority
Click on
Help
or see the parameter
descriptions beginning on page A-29.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.