User's Manual

Connecting the Router to a Blacker Front End
308625-14.00 Rev 00
4-7
Full Addressing On
Acceptance Format Defext
Release Format Defext
CCITT (now ITU-T)
Conformance
DXE1980
Network Standard DOD
Table 4-2. BFE X.25 Network Service Record Parameter Settings
Parameter Setting
Enable Enable
Type DDN
Connection ID Parameter is ignored.
Remote IP Address Specify the IP address of the remote system.
Remote X.121 Address Parameter is ignored.
Broadcast Parameter is ignored.
Max Connections Any valid setting
Precedence Any valid setting. The BFE will accept, but not act on, the
DDN Precedence facility.
Max Idle Any valid setting
Call Retry Any valid setting
Flow Facility Set to on if you want to use a value other than the default
window size and packet size configured in the BFE.
Window Size Range is 2 to 7. If you want to use a value other than the
default window size configured in the BFE, set Flow
Facility to on. You must coordinate this value with the
packet-level value.
(continued)
Table 4-1. BFE X.25 Packet-Level Parameter Settings
(continued)
Parameter Setting