User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
A-6
308625-14.00 Rev 00
Parameter: Remote Physical IP Address
Path: Configuration Manager > Protocols > IP > GRE > Remote Conn
Default: 0.0.0.0
Options: IP interface address
Function: Specifies the IP address of the physical router interface at the remote end of the
GRE tunnel. This address is visible to the network cloud that the tunnel passes
through.
Instructions: Enter an IP address in dotted-decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.28.1.6
Parameter: Remote Logical IP Address
Path: Configuration Manager > Protocols > IP > GRE > Remote Conn > Add
Default: None
Options: IP interface address
Function: Specifies the address of the IP interface configured at the remote end of the
GRE tunnel. This address is not visible to the network cloud that the tunnel
passes through.
Instructions: Enter the appropriate IP address in dotted-decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.1
Parameter: Remote Logical IPX Address (hex)
Path: Configuration Manager > Protocols > IP > GRE > Remote Conn > Add
Default: None
Options: Valid IPX address of the remote host
Function: Specifies the address of the IPX interface configured at the remote end of the
GRE tunnel. This address is not visible to the network cloud that the tunnel
passes through.
Instructions: Enter an IPX address up to 12 hexadecimal characters.
MIB Object ID: 1.3.6.1.4.1.18.3.5.5.26.1.5