User's Manual

Site Manager Parameters
308625-14.00 Rev 00
A-9
Parameter: Log Mask
Path: Configuration Manager > Protocols > IP > NAT > Global
Default: None
Options: Any number of message types specified using a bit mask
Function: Specifies the types of log messages that are reported by NAT software.
Instructions: Click on Values and select the message types that you want to log.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.1.6
Parameter: Mapping Entry Timeout
Path: Configuration Manager > Protocols > IP > NAT > Global
Default: Enable
Options: Enable
|
Disable
Function: Enables or disables the translation entry timeout feature for NAT. If there are no
translated packets for a specific address mapping when the timer expires, NAT
software removes the entry from the dynamic mapping entry list, thus freeing
the global address for another mapping.
Instructions: Set to Enable to enable the translation entry timeout feature. Set to Disable to
disable the feature.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.1.7
Parameter: Max Timeout
Path: Configuration Manager > Protocols > IP > NAT > Global
Default: 3600 seconds
Options: 1 to 2,147,483,647 seconds
Function: Specifies the translation entry timeout period. If there are no translated packets
for a specific address mapping when the timer expires, NAT software removes
the entry from the dynamic mapping entry list, thus freeing the global address
for another mapping.
Instructions: Specify the timeout period.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.1.8