User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
A-10
308625-14.00 Rev 00
Parameter: Synchronization
Path: Configuration Manager > Protocols > IP > NAT > Global
Default: Disable
Options: Enable
|
Disable
Function: Enables or disables NAT synchronization. Enabling synchronization allows this
router to receives translation updates from peer routers. If this router is
configured with address ranges and peers, enabling synchronization also allows
this router to send translation updates. Deactivating this feature causes this
router to immediately terminate any TCP connections that it has open to its
peers.
Instructions: Set to Enable to enable synchronization. Set to Disable to disable
synchronization.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.1.12
Parameter: Synch Router ID
Path: Configuration Manager > Protocols > IP > NAT > Global
Default: 0.0.0.0
Options: Any integer in dotted-decimal notation
Function: Specifies this router’s unique synch router ID. The router receiving a peer
connection request compares the router ID against its list of peer routers before
accepting the connection.
Instructions: Enter a unique ID for this router. You can use the IP address of the router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.1.13
Parameter: Synchronization Port
Path: Configuration Manager > Protocols > IP > NAT > Global
Default: 670
Options: 0 to 16640
Function: Identifies the port number to be used in TCP connections between peer routers.
Instructions: Enter an unused TCP port number. Be sure to configure all routers in a
synchronized configuration with the same TCP port number.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.1.14