User's Manual

Site Manager Parameters
308625-14.00 Rev 00
A-13
Parameter: Enable
Path: Configuration Manager > Protocols > IP > NAT > Interface
Default: Enable
Options: Enable
|
Disable
Function: Enables or disables NAT on an IP interface.
Instructions: Set to Enable to enable NAT on an IP interface. Set to Disable to disable NAT on
an IP interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.6.1.2
Parameter: Interface Type
Path: Configuration Manager > Protocols > IP > NAT > Interface
Default: Local
Options: Local
|
Global
Function: Specifies the NAT interface type. The NAT router is configured with local and
global interfaces. Local interfaces are attached to the local network. When a
packet comes into the local interface, the NAT router examines the packet’s
source address to determine whether it should be translated into a global address
before forwarding. Global interfaces are attached to the external network. When
a packet comes into the global interface, the NAT router examines the packet’s
destination address to determine if it is an existing translation.
Instructions: Set to Local to configure the local interface. Set to Global to configure the
global interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.6.1.5