User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
A-18
308625-14.00 Rev 00
Parameter: IP Address
Path: Configuration Manager > Protocols > IP > NAT > Dynamic > Local > Add
Default: None
Options: Local IP address
Function: Together with the prefix length, specifies a local address range. NAT maps a
local address within this range to a registered global address.
Instructions: Enter the appropriate IP address in dotted-decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.3.1.3
Parameter: Prefix Length
Path: Configuration Manager > Protocols > IP > NAT > Dynamic > Local > Add
Default: None
Options: 0 to 32 (decimal)
Function: Specifies the local address range prefix length. The address range prefix length
indicates the network portion of the local address range. For example, the prefix
length 255.255.255.0 for the local address 10.1.1.0 sets the available local
addresses to 10.1.1.0 through 10.1.1.255.
Instructions: Enter the appropriate prefix length in decimal.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.3.1.4
Parameter: Enable
Path: Configuration Manager > Protocols > IP > NAT > Dynamic > Local
Default: Enable
Options: Enable
|
Disable
Function: Enables or disables a local address range. The NAT router maps local addresses
to registered global addresses.
Instructions: Set to Enable to enable the local address range. Set to Disable to disable the
local address range.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.3.1.2