User's Manual

Site Manager Parameters
308625-14.00 Rev 00
A-21
NAT Synchronization Peer Parameters
The NAT Synchronization Peer List window (Figure A-8) allows access to
parameters that configure NAT synchronization peers.
Figure A-8. NAT Synchronization Peer List Window
Parameter: Enable
Path: Configuration Manager > Protocols > IP > NAT > Dynamic > Global
Default: Enable
Options: Enable
|
Disable
Function: Enables or disables a global address range. The NAT router maps local
addresses to registered global addresses.
Instructions: Set to Enable to enable the global address range. Set to Disable to disable the
global address range.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.2.1.2