User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
A-22
308625-14.00 Rev 00
To access the NAT Synchronization Peer List window, complete the following
tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
NAT
. The NAT menu opens.
4. Choose
Synch Peer
. The NAT Synchronization Peer List
window opens.
Parameter: Peer Synch Router ID
Path: Configuration Manager > Protocols > IP > NAT > Synch Peer > Add
Default: None
Options: Any unique ID expressed in dotted-decimal notation
Function: Specifies the synch router ID for the peer that this router will send translation
updates to or receives updates from.
Instructions: Enter the unique synch router ID for each peer router in a synchronized
configuration in dotted-decimal notation. You can use the address of an existing
IP interface.
MIB Object ID: 99999.771.5
Parameter: Peer Disable
Path: Configuration Manager > Protocols > IP > NAT > Synch Peer
Default: Enable
Options: Enable
|
Disable
Function: Enables or disables a peer router. When disabled, all TCP connections to the
peer routers are terminated.
Instructions: Select Enable to enable a peer router. Select Disable to disable a peer router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.7.7.1.2