User's Manual

Site Manager Parameters
308625-14.00 Rev 00
A-25
Parameter: Enable Security
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Enable
Options: Enable
|
Disable
Function: Enables or disables IP security options for this interface.
Instructions: Set to Disable if you want to disable IP security options. If you set this
parameter to Disable, the router accepts only the following IP datagrams:
labeled IP datagrams with the classification level set to Unclassified and no
authority flags set, and unlabeled IP datagrams.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.76
Parameter: Strip Security
Path: Configuration Manager > Protocols > IP > Interfaces
Default: None
Options: None
|
Incoming
|
Outgoing
|
All
Function: Specifies the type of IP datagram from which the router should remove the IP
security options.
Instructions: Select the type of IP datagram from which you want IP security options to be
removed. None causes the router to leave IP security options on all inbound
and outbound IP datagrams intact. Incoming causes the router to strip the IP
security option from each incoming IP datagram after checking the IP
datagram against the interface’s security configuration. Outgoing causes the
router to strip the IP security option from each outgoing IP datagram before
checking each datagram against the interface’s security configuration. All
causes the router to strip the IP security options from both incoming and
outgoing IP datagrams: incoming datagrams after checking each against this
interface’s security configuration and outgoing datagrams before checking
each against the interface’s security configuration. If you set this parameter to
Outgoing or All, then you must set the Require Out Security parameter to
None. (Similarly, if you set the Require Out Security parameter to Forwarded,
Originated, or All, then you must set this parameter to None or Incoming.)
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.77