User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
A-26
308625-14.00 Rev 00
Parameter: Require Out Security
Path: Configuration Manager > Protocols > IP > Interfaces
Default: All
Options: None
|
Forwarded
|
Originated
|
All
Function: Specifies which type of outbound datagrams require IP security labels.
Instructions: Select None: the router forwards unlabeled IP datagrams unchanged on this
interface. In addition, those IP datagrams that it originates and transmits do not
require labels. Select Forwarded: the router requires all IP datagrams that it
forwards on this interface (not those it originates) to contain basic IP security
options. If the datagram already contains an IP security label, the router
forwards the datagram unchanged. If the datagram is unlabeled, the router adds
the implicit or default label to the datagram before forwarding it. Select
Originated: the router specifies basic IP security options for all IP datagrams
that it originates and transmits on this interface. The router adds the default label
to IP datagrams that it originates and transmits on this interface. Select All: the
router requires all datagrams (both those that it forwards and those it originates)
on this interface to contain basic IP security options. It supplies the implicit or
default label for those datagrams that do not already contain one. If you set this
parameter to Originated or All, you must enable the Default Label and Error
Label parameters.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.78
Parameter: Require In Security
Path: Configuration Manager > Protocols > IP > Interfaces
Default: All
Options: None
|
All
Function: Specifies which type of incoming IP datagram requires security labels.
Instructions: Select None: the router does not require inbound IP datagrams to contain labels.
Select All: the router requires all inbound IP datagrams received on this interface
to contain basic IP security options.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.79