User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
A-28
308625-14.00 Rev 00
Parameter: Must Out Authority
Path: Configuration Manager > Protocols > IP > Interfaces
Default: No authority flags selected
Options: No authority flags selected
|
GENSER
|
SIOPESI
|
SCI
|
NSA
|
DOE
Function: Specifies which authority flags must be set in the protection authority field of
all outbound datagrams.
Instructions: Select all authority flags that the router must set in all outbound IP datagrams
that it transmits on this interface. If you do not select any authority flags (the
default setting), the router does not set any protection authority flags in
outbound IP datagrams.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.82
Parameter: May Out Authority
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Any
Options: Any
|
GENSER
|
SIOPESI
|
SCI
|
NSA
|
DOE
Function: Specifies which authority flags may be set in the protection authority field of all
outbound datagrams. The authority flags that you specify here must be a superset
of the authority flags that you specify for the Must Out Authority parameter.
Instructions: The default setting specifies that any of the authority flags may be set. Either
accept the default setting or reset and select only those authority flags that are
appropriate.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.83