User's Manual

Site Manager Parameters
308625-14.00 Rev 00
A-29
Parameter: Must In Authority
Path: Configuration Manager > Protocols > IP > Interfaces
Default: No authority flags selected
Options: No authority flags selected
|
GENSER
|
SIOPESI
|
SCI
|
NSA
|
DOE
Function: Specifies which authority flags must be set in the protection authority field of
inbound IP datagrams.
Instructions: Select all authority flags that must be set in inbound IP datagrams received on
this interface. If you do not select any authority flags (the default setting), then
the router does not require a datagram to have authority flags set, but still accepts
the datagram if any flags are set.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.84
Parameter: May In Authority
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Any
Options: Any
|
GENSER
|
SIOPESI
|
SCI
|
NSA
|
DOE
Function: Specifies which authority flags may be set in the protection authority field of
inbound IP datagrams. The authority flags that you specify here must be a
superset of the authority flags that you specify for the Must In Authority
parameter.
Instructions: The default setting specifies that any of the authority flags may be set. Either
accept the default setting or reset and select only those authority flags that are
appropriate.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.85