User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
A-30
308625-14.00 Rev 00
Parameter: Implicit Label
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Enable
Options: Enable
|
Disable
Function: If you select Enable, the router uses the Implicit Authority and Implicit Level
fields to create an implicit label. The router supplies the implicit label to
unlabeled inbound datagrams received by this interface. If you select Disable,
the router does not supply implicit labels for this interface.
Instructions: Accept the default, Enable, to allow the router to supply implicit labels for
unlabeled inbound datagrams.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.86
Parameter: Implicit Authority
Path: Configuration Manager > Protocols > IP > Interfaces
Default: No authority flags selected
Options: No authority flags selected
|
GENSER
|
SIOPESI
|
SCI
|
NSA
|
DOE
Function: Specifies the authority flags that the router sets when it supplies implicit
security labels for unlabeled inbound IP datagrams.
Instructions: Select all authority flags that the router should set when it supplies an implicit
security label. The set of authority flags that you specify here must include the
set of authority flags that you specified for the Must In Authority parameter,
and cannot include any of the flags that you did not specify for the May In
Authority parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.87