User's Manual

Site Manager Parameters
308625-14.00 Rev 00
A-33
Parameter: Error Label
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Enable
Options: Enable
|
Disable
Function: If you select Enable, the router uses the Error Authority and Minimum Level
fields to create an error label. The router supplies the error label to outbound
ICMP error datagrams. If you select Disable, the router does not supply error
labels for this interface.
Instructions: To allow the router to supply error labels for outbound ICMP error datagrams,
accept the default, Enable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.92
Parameter: Error Authority
Path: Configuration Manager > Protocols > IP > Interfaces
Default: No authority flags selected
Options: No authority flags selected
|
GENSER
|
SIOPESI
|
SCI
|
NSA
|
DOE
|
ALL
Function: Specifies the authority flags that the router uses when it supplies error security
labels to outbound ICMP error datagrams.
Instructions: Select authority flags that the router should set when it supplies error security
labels to outbound ICMP error datagrams. The set of authority flags that you
specify here must include the set of authority flags that you specified for the
Must Out Authority parameter, and cannot include any of the flags that you did
not specify for the May Out Authority parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.93