User's Manual

308625-14.00 Rev 00
Index-1
A
accept policies, configuring for GRE tunnels, 1-6, 1-7
acronyms, xvii
announce policies, configuring for GRE tunnels, 1-6
authority flags (RIPSO)
inbound datagrams, 3-12
outbound datagrams, 3-11
authority values (RIPSO), 3-4
B
BFE. See Blacker Front-End support
Blacker Front-End support
addressing, 4-3
configuring, 4-4
overview, 4-1
X.25 packet-level parameter settings for, 4-5
X.25 service-level parameter settings for, 4-7
C
circuitless IP address, using as GRE tunnel interface,
1-4
configuring
Blacker Front-End support, 4-1
GRE tunnels, 1-8
NAT, 2-11
NAT synchronization, 2-18
RIPSO, 3-1
Connection Name parameter (GRE), 1-15, A-5
conventions, text, xvi
customer support, xix
D
Default Authority parameter (RIPSO), 3-14, A-32
Default Label parameter (RIPSO), 3-14, A-31
default labels (RIPSO)
defined, 3-5
enabling or disabling use of, 3-14
Default Level parameter (RIPSO), 3-14, A-32
deleting
GRE
remote tunnel end point, 1-21
tunnel, 1-23
tunnel protocol, 1-19
NAT
from an interface, 2-37
global address range, 2-52
local address range, 2-47
static address mapping, 2-41
synchronized peer routers, 2-69
disabling
GRE
remote tunnel end point, 1-20
tunnel, 1-16
tunnel protocol, 1-18
NAT
global address range, 2-50
local address range, 2-45
on an interface, 2-33
on the router, 2-23
static address mapping, 2-40
synchronized peer routers, 2-67
translation entry timeout, 2-28
NAT synchronization, 2-58
RIPSO
error labeling, 3-15
labeling for unlabeled outbound datagrams, 3-14
on an interface, 3-6
Index