User's Manual

Index-4
308625-14.00 Rev 00
network address port translation. See N-to-1 translation
(NAT)
Network Address Translation. See NAT
Nto1 Address parameter (NAT local address range),
2-57, A-19
n-to-1 command (BCC), 2-56
N-to-1 translation (NAT)
configuring using Site Manager, 2-57
configuring using the BCC, 2-56
defined, 2-9
overview, 2-53
P
Peer Address parameter (NAT synchronized peers),
2-21, 2-66, A-23
peer command (BCC), 2-19, 2-65
Peer Disable parameter (NAT synchronized peers),
2-68, A-22
peer routers, NAT synchronization
configuring, 2-19, 2-21, 2-65
deleting, 2-69
enabling and disabling, 2-67
Peer Synch Router ID parameter (NAT synchronized
peers), 2-21, 2-66, A-22
port, TCP, changing for NAT synchronization, 2-62
Prefix Length parameter (NAT)
global address range, 2-17, 2-49, A-20
local address range, 2-16, 2-44, A-18
product support, xix
protocols, encapsulated in GRE tunnels
adding, 1-10
deleting, 1-19
disabling and reenabling, 1-18
listed, 1-2
publications
hard copy, xviii
related, xviii
R
Remote Logical IP Address parameter (GRE), 1-15,
A-6
Remote Logical IPX Address parameter (GRE), 1-15,
A-6
Remote Physical IP Address parameter (GRE), 1-15,
A-6
remote tunnel end point (GRE)
configuring, 1-12
deleting, 1-21
disabling and reenabling, 1-20
remote-endpoint command (BCC), 1-13
Require In Security parameter (RIPSO), 3-9, A-26
Require Out Security parameter (RIPSO), 3-8, A-26
Revised IP Security Option. See RIPSO
RIPSO
default labels
defined, 3-5
enabling or disabling use of, 3-14
enabling or disabling on an interface, 3-6
error labels
defined, 3-2
enabling or disabling use of, 3-15
example of, 3-16
implicit labels
defined, 3-5
supplying, 3-13
overview, 3-1
security labels
format, 3-2
specifying inbound datagram types for, 3-9
specifying outbound datagram types for, 3-8
security levels for IP datagrams, 3-10
Site Manager parameters, A-24
stripping security options from datagrams, 3-7
unlabeled IP datagrams, 3-5
routing loops, in GRE tunnels, avoiding, 1-6