User's Manual

Configuring GRE Tunnels

308625-14.00 Rev 00

1-9

For example, the following command sequence creates the tunnel boston with

the local physical end point 197.1.2.3 and verifies the addition:

tunnels# gre name boston local-address 197.1.2.3

gre/boston# info

name boston

local-address 197.1.2.3

state enabled

Go to “Adding a Protocol to the Local Tunnel End Point” on page 1-10.

Using Site Manager

To create a GRE tunnel, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

GRE

. The GRE Create Tunnels List window

opens.

4. Click on

Add Tunnel

. The Create GRE Tunnel window opens.

5. Set the following parameters:

• IP Interface

• Tunnel Name

Click on

Help

or see the parameter

descriptions beginning on page A-3.

6. Click on

. You return to the GRE Create Tunnels

List window.

7. Go to “Adding a Protocol to the Local

Tunnel End Point” on page 1-10.