User's Manual

Configuring GRE Tunnels
308625-14.00 Rev 00
1-11
Adding an IPX Protocol Interface
To add an IPX protocol interface to a GRE tunnel, navigate to the GRE tunnel
interface prompt (for example,
box; tunnels; gre/boston
) and enter:
ipx address
<address>
host-address
<host_address>
address
is a valid IPX network ID. Enter a 4-byte hexadecimal string of up to
8 characters.
host_address is a valid IPX host address that is unique within the IPX
internetwork. Enter up to four characters in hexadecimal format. The IPX host
address maps to a physical data link layer address on a specific circuit or physical
interface.
The following command adds the IPX interface 00112233 with the host address
4411 to the tunnel boston:
gre/boston#
ipx address 00112233 host-address 4411
ipx/00112233#
For a complete description of IPX interface configuration, see Configuring IPX
Services.
Go to “Configuring the Remote Tunnel End Point” on page 1-12.
Using Site Manager
To add a protocol to a GRE tunnel, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
GRE
. The GRE Create Tunnels List window
opens.
4. Choose a tunnel from the list and click on
Add/Del Prot
.
The Select Protocols window opens.
5. Choose one or more protocols from the list
and click on
OK
.
The appropriate protocol configuration
windows open.
(continued)