User's Manual

Configuring GRE Tunnels
308625-14.00 Rev 00
1-15
Using Site Manager
To configure a remote tunnel end point, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
GRE
. The GRE Create Tunnels List window
opens.
4. Choose a tunnel from the list and click on
Remote Conn
.
The GRE Remote Connections List
window opens.
5. Click on
Add
. The Create GRE Remote Connection
window opens.
6. Set the following parameters:
• Connection Name
• Remote Physical IP Address
• Remote Logical IP Address
• Remote Logical IPX Address (hex)
Click on
Help
or see the parameter
descriptions beginning on page A-5.
Depending on which protocols you added
to the tunnel (IP, IPX, or both), Site
Manager allows you to configure the
Remote Logical IP Address or the
Remote Logical IPX Address (hex)
parameter, or both.
7. Click on
OK
. You return to the GRE Remote
Connections List window.
8. Click on
Done
. You return to the GRE Create Tunnels
List window.
9. Click on
Done
. You return to the Configuration Manager
window.