User's Manual

Configuring Network Address Translation
308625-14.00 Rev 00
2-15
Configuring the Global Interface
The global interface is connected to the external internetwork. IP packets arriving
at the global interface from the outside internetwork may be looked up and
translated if necessary.
To configure the global NAT interface, complete the following tasks:
8. Click on
OK
to accept the default interface
type for NAT (local).
You return to the Circuit Definition
window.
9. Choose
File
. The File menu opens.
10. Choose
Exit
. You return to the Configuration Manager
window.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
click on the connector that you want to
configure as the NAT global interface.
The Edit Connector window opens.
2. Click on
Edit Circuit
. The Circuit Definition window opens.
3. Choose
Protocols
. The Protocols menu opens.
4. Choose
Add/Delete
. The Select Protocols window opens.
5. Click on
NAT
.
6. Click on
OK.
The NAT Interface Configuration window
opens.
7. Set the
Interface Type
parameter to
Global
.
8. Click on
OK
. You return to the Circuit Definition
window.
9. Choose
File
. The File menu opens.
10. Choose
Exit
. You return to the Configuration Manager
window.
Site Manager Procedure
(continued)
You do this System responds