User's Manual

Configuring Network Address Translation
308625-14.00 Rev 00
2-25
Using Site Manager
To specify the slots on which NAT can run as a soloist, complete the following
tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
NAT
. The NAT menu opens.
4. Choose
Global
. The NAT Base Group Record window
opens.
5. Click in the
Soloist Slot Mask
field.
6. Click on
Values
. Site Manager displays a list of slots.
7. Choose the slots that you want to specify
as available to run as a soloist. Click on
Help
or see the parameter description on
page A-8.
Site Manager displays the binary values
that correspond to your slot selections in
the Soloist Slot Mask field.
For example, if a router has five slots, and
you choose slots 3 and 5, the binary
value 00101 appears in the Soloist Slot
Mask field. The leftmost bit represents
the slot with the lowest number.
8. Click on
OK
. You return to the Configuration Manager
window.