User's Manual

Configuring Network Address Translation
308625-14.00 Rev 00
2-31
Customizing a NAT Interface
This section includes the following topics:
Adding NAT to an IP Interface
Use the BCC or Site Manager to add NAT to an IP interface.
Using the BCC
To add NAT to an existing IP interface, navigate to an IP interface-specific prompt
(for example,
box; ethernet/13/1; ip/1.2.3.4/255.0.0.0
) and enter:
nat
For example, the following command sequence adds NAT to IP interface
1.2.3.4/255.0.0.0 and displays default NAT interface parameters:
ip/1.2.3.4/255.0.0.0#
nat
nat/1.2.3.4#
info
type local
state enabled
When you add NAT to an IP interface, it becomes a local interface by default. To
configure an interface as a global interface, set the
type
parameter to
global
.
Topic Page
Adding NAT to an IP Interface
2-31
Enabling and Disabling NAT on an Interface 2-33
Modifying the Interface Type 2-35
Deleting NAT from an IP Interface 2-37