User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
2-32
308625-14.00 Rev 00
Using Site Manager
To add NAT to an IP interface, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
click on the connector to which you want to
add NAT services.
The Edit Connector window opens.
2. Click on
Edit Circuit
. The Circuit Definition window opens.
3. Choose
Protocols
. The Protocols menu opens.
4. Choose
Add/Delete
. The Select Protocols window opens.
5. Click on
NAT
. Site Manager highlights the selection.
6. Click on
OK
. If this is the first NAT interface on the
router, the NAT Global Configuration
window opens.
7. Click on
OK
to accept the default values
for NAT global parameters.
The NAT Interface Configuration window
opens.
8. Set the
Interface Type
parameter. Click
on
Help
or see the parameter description
on page A-13.
9. Click on
OK
. You return to the Circuit Definition
window.
10. Choose
File
. The File menu opens.
11. Choose
Exit
. You return to the Configuration Manager
window.