User's Manual

Configuring Network Address Translation
308625-14.00 Rev 00
2-37
Deleting NAT from an IP Interface
Use the BCC or Site Manager to delete NAT from an IP interface.
Using the BCC
To delete NAT from an interface, navigate to the NAT interface prompt (for
example,
box; ethernet/13/1; ip/1.2.3.4/255.0.0.0; nat/1.2.3.4
) and enter:
delete
For example, the following command deletes NAT from IP interface 1.2.3.4/
255.0.0.0:
ip/1.2.3.4/255.0.0.0#
nat
nat/1.2.3.4#
delete
ip/1.2.3.4/255.0.0.0#
Using Site Manager
To delete NAT from an interface, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
click on the connector from which you
want to delete NAT services.
The Edit Connector window opens.
2. Click on
Edit Circuit
. The Circuit Definition window opens.
3. Choose
Protocols
. The Protocols menu opens.
4. Choose
Add/Delete
. The Select Protocols window opens. The
NAT button is checked to show that NAT
is enabled on the circuit.
5. Click on
NAT
.
6. Click on
OK
. You return to the Circuit Definition
window.
7. Choose
File
. The File menu opens.
8. Choose
Exit
. You return to the Configuration Manager
window.