User's Manual

Configuring Network Address Translation
308625-14.00 Rev 00
2-39
For example, the following command sequence maps the local address 10.1.1.1 to
the global address 199.1.42.200 and verifies the entry:
nat# static-map 10.1.1.1/199.1.42.200
static-map/10.1.1.1/199.1.42.200# info
local-address 10.1.1.1
global-address 199.1.42.200
protocol none
local-port 0
global-port 0
state enabled
Using Site Manager
To add a static address mapping, complete the following tasks:
Note:
The parameters protocol, local-port, and global-port are reserved for
future use. You cannot modify these parameters.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
NAT
. The NAT menu opens.
4. Choose
Static
. The NAT Static Translation List window
opens.
5. Click on
Add
. The NAT Static Translation Add window
opens.
6. Set the following parameters:
•
Local Address
•
Global Address
Click on
Help
or see the parameter
descriptions beginning on page A-15.
7. Click on
OK
. The static mapping pair appears in the list
of current mapping pairs.
8. Click on
Done
. You return to the Configuration Manager
window.