User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
2-40
308625-14.00 Rev 00
Enabling and Disabling a Static Address Mapping
When you add a static address mapping, it is enabled by default. You can use the
BCC or Site Manager to disable or reenable it.
Using the BCC
To enable or disable a static address mapping, navigate to the static map prompt
(for example,
box; ip; nat; static-map/10.1.1.1/199.1.42.200
) and enter:
state
<state>
state
is one of the following:
enabled
(default)
disabled
For example, the following command disables the static mapping entry
10.1.1.1/199.1.42.200:
static-map/10.1.1.1/199.1.42.200#
state disabled