User's Manual

Configuring Network Address Translation

308625-14.00 Rev 00

2-41

Using Site Manager

To enable or disable a static address mapping, complete the following tasks:

Deleting a Static Address Mapping

You can use the BCC or Site Manager to delete a static address mapping.

Using the BCC

To delete a static address mapping, navigate to the static map prompt (for

example,

box; ip; nat; static-map/10.1.1.1/199.1.42.200

) and enter:

delete

For example, the following command deletes the static address mapping

10.1.1.1/199.1.42.200:

static-map/10.1.1.1/199.1.42.200#

delete

nat#

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

NAT

. The NAT menu opens.

4. Choose

Static

. The NAT Static Translation List window

opens.

5. Select the static mapping that you want to

enable or disable from the list.

6. Set the

Enable

parameter. Click on

Help

or see the parameter description on page

A-15.

7. Click on

Done

. You return to the Configuration Manager

window.