User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
2-44
308625-14.00 Rev 00
Using Site Manager
To configure a local address range, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
NAT
. The NAT menu opens.
4. Choose
Dynamic
. The NAT Dynamic menu opens.
5. Choose
Local.
The NAT Local Address Range List
window opens.
6. Click on
Add
. The NAT Local Address Range Add
window opens.
7. Set the following parameters:
• IP Address
• Prefix Length
Click on
Help
or see the parameter
descriptions beginning on page A-18.
8. Click on
OK
. You return to the NAT Local Address
Range List window.
9. Click on
Done
. You return to the Configuration Manager
window.