User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
2-46
308625-14.00 Rev 00
Using Site Manager
To disable or reenable a local address range, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
NAT
. The NAT menu opens.
4. Choose
Dynamic
. The NAT Dynamic menu opens.
5. Choose
Local.
The NAT Local Address Range List
window opens.
6. Select the local address range that you
want to enable or disable.
The local address range is highlighted.
7. Set the
Enable
parameter. Click on
Help
or see the parameter description on page
A-18.
8. Click on
Done
. You return to the Configuration Manager
window.