User's Manual

Configuring GRE, NAT, RIPSO, and BFE Services
2-50
308625-14.00 Rev 00
Enabling and Disabling a Global Address Range
When you create a global address range, it is enabled by default. You can use the
BCC or Site Manager to disable or reenable it.
Using the BCC
To disable or reenable a global address range, navigate to the global address range
prompt (for example,
box; ip; nat; global-range/199.1.2.0/24
) and enter:
state
<state>
state
is one of the following:
enabled
(default)
disabled
For example, the following command sequence disables the global address range
199.1.2.0/24 and verifies the entry:
global-range/199.1.2.0/24#
state disabled
global-range/199.1.2.0/24#
info
start-address 199.1.2.0
prefix-length 24
state disabled