User's Manual

Configuring Network Address Translation
308625-14.00 Rev 00
2-51
Using Site Manager
To disable or reenable a global address range, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
NAT
. The NAT menu opens.
4. Choose
Dynamic
. The NAT Dynamic menu opens.
5. Choose
Global
. The NAT Global Address Range List
window opens.
6. Select the global address range that you
want to disable or reenable.
The global address range is highlighted.
7. Set the
Enable
parameter. Click on
Help
or see the parameter description on page
A-21.
8. Click on
Done
. You return to the Configuration Manager
window.