DEFINITY 4624 IP Telephone User's Guide
Table Of Contents
- Copyright and Legal Notices
- About This Document
- 4624 IP Telephone Description
- Using Programmable Buttons
- Using the Display Screen
- Call Handling Features
- IP Telephone Features
- Introduction
- Accessing IP Telephone Features
- Feature List
- Abbreviated Dialing (AD)
- Account
- Automatic Callback
- Automatic Intercom
- Button View
- Call Display
- Call Forwarding
- Call Park
- Call Pickup and Directed Call Pickup
- Consult
- Directory
- Drop (a Person from a Conference Call)
- Exclusion
- Group Paging
- Hands Free Answer on Intercom
- Headset On/Off
- Inspect
- Internal Auto Answer (Hands Free Answer)
- Leave Word Calling
- Pause (During Abbreviated Dialing)
- Priority Calling
- Program Abbreviated Dialing
- Release
- Ringer Off
- Self-Administration
- Send All Calls
- Stored Number (View)
- Timer
- Whisper Page (Activate)
- Whisper Page Answer
- Whisper Page Off
- Retrieving Voice Messages
- IP Telephone Management Features
- Using a Headset or Specialized Handset
- Troubleshooting
5-20
Issue 1 July 2001
Stored Number (View)
The Stored Number feature lets you display:
■
The numbers stored in Abbreviated Dialing (AD) locations
■
The number you last dialed
Viewing either the last number dialed or a
number stored on an AD button
1. If one has been programmed by your System Administrator, press the
View
Line/Feature button.
2. To view the last number dialed, press
Redial
,
or
To view the number stored on an Abbreviated Dialing button, press the
applicable AD Line/Feature button.
The associated telephone number displays.
3. To return to call handling mode, press
Exit
or, to see another
feature/number, repeat this procedure from Step 2.
Timer
The Timer (display) feature lets you measure elapsed time.
Viewing elapsed time (hours, minutes, seconds)
1. Press
Menu
,
then press the softkey below
Timer
,
or
If
Timer
is not available on your display, press the Line/Feature button your
System Administrator has programmed for the
Timer
feature.
The elapsed time displays.
2. To stop the Timer and clear the display, press
Menu
, then press the softkey
below
Timer
again,
or
If
Timer
is not available on your display, press the button your System
Administrator has programmed for the
Timer
feature again.
The time elapsed since initiating the Timer displays for about three
seconds, then disappears.