DEFINITY 4624 IP Telephone User's Guide
Table Of Contents
- Copyright and Legal Notices
- About This Document
- 4624 IP Telephone Description
- Using Programmable Buttons
- Using the Display Screen
- Call Handling Features
- IP Telephone Features
- Introduction
- Accessing IP Telephone Features
- Feature List
- Abbreviated Dialing (AD)
- Account
- Automatic Callback
- Automatic Intercom
- Button View
- Call Display
- Call Forwarding
- Call Park
- Call Pickup and Directed Call Pickup
- Consult
- Directory
- Drop (a Person from a Conference Call)
- Exclusion
- Group Paging
- Hands Free Answer on Intercom
- Headset On/Off
- Inspect
- Internal Auto Answer (Hands Free Answer)
- Leave Word Calling
- Pause (During Abbreviated Dialing)
- Priority Calling
- Program Abbreviated Dialing
- Release
- Ringer Off
- Self-Administration
- Send All Calls
- Stored Number (View)
- Timer
- Whisper Page (Activate)
- Whisper Page Answer
- Whisper Page Off
- Retrieving Voice Messages
- IP Telephone Management Features
- Using a Headset or Specialized Handset
- Troubleshooting
9-4
Issue 1 July 2001
Resetting and Power Cycling the IP
Telephone
Reset your IP Telephone when other Troubleshooting suggestions do not correct
the problem. Use a Power Cycle with the approval of your System Administrator
only
when a reset does not resolve the problem.
Resetting your phone
This basic reset procedure should resolve most problems.
1. Press
Hold
.
2. Using the dial pad, press the following keys in sequence:
73738#
The display shows the message "Reset values? * = no # = yes."
3. Choose one of the following:
4. Press
#
to restart the phone or
*
to terminate the restart and restore the
phone to its previous state.
NOTE:
Any reset/restart of your phone may take a few minutes.
If you want to Then
Reset the phone without
resetting any assigned
values
Press
*
(asterisk).
A confirmation tone sounds
and the display prompts
"Restart phone? * = no # =
yes."
Reset the phone and any
previously assigned
(programmed) values
(Use this option only if your
phone has programmed,
static values)
Press # (the pound key).
The display shows the
message "Resetting values"
while your IP Telephone
resets its programmed
values, such as the IP
address, to its default
values, and re-establishes
the connection to the server.
The display then prompts
"Restart phone? * = no # =
yes."