User guide

4625SW IP Telephone Options
58 4625SW IP Telephone User Guide
3. Save the setting by pressing the Save softkey or to restore the previous setting without
making a change, press the Cancel softkey.
The first Options Main screen displays.
Note:
Note: Going off-hook, receiving a call, or losing power during ring pattern selection
interrupts the process, and you must start over from Step 1
.
Adjust the ringer volume using the Volume Control buttons, as discussed in
Table 1: 4625SW IP Telephone Button/Feature Descriptions
.
Status Screen Viewing Options
Four views of telephone and system information are available. A user generally does not need
to view this information. However, if problems occur, your System Administrator might ask you
to report certain values from any status screen.
Note:
Note: Status screen data can be viewed, but cannot be changed.
1. Select View IP Settings from the Options Main screen (accessed by pressing the phone’s
Option button).
The View Status Main Screen displays.
2. To select any option on this screen, press the Line/Feature button on either side of that
option. When a screen has more than one page, the Paging Indicator displays. Use the
Page Right or Page Left Indicator buttons to scroll from one page to another as
applicable.
3. To return to the first Options Main screen from any status screen, press the Return softkey.
Each option is described in the following sub-sections.
Viewing IP Address Status
IP (Internet Protocol) Address information encompasses two screens and identifies certain
components and connections. IP Address information includes:
● the location (address) of your phone on your system’s Call Server,
● the location and port (connection) of the Call Server itself,
● the call routing and mask addresses, and
● the identification of the File Server with which your telephone interacts.
Although technical in nature, your System Administrator might ask you for information to track
questions about or problems with phone functions or connections.