Wireless Router User Guide

Trap Managers Configuration
206 Avaya Integrated Management Release 4.0.1 Software Update Manager
The first row in the Device Trap Managers Table is reserved for the Dynamic Trap Manager
entry. The Dynamic Trap Manager is discovered automatically and the IP address is read-only.
The entry row for the Dynamic Trap Manager is highlighted in grey.
For information on adding and removing trap managers and editing their trap reporting statuses,
refer to “Editing the Trap Managers Table” on page 206
.
Editing the Trap Managers Table
You can add and remove managers from the Trap Managers table.
To add managers to the table:
1. Click Insert.
2. Enter the IP address of the designated management station.
3. Repeat the procedure for each manager.
To remove managers from the table:
1. Click the row with the manager’s IP address.
2. Click Delete.
3. Repeat the procedure for each manager.
TFTP Server Events When checked, TFTP Server events are sent to the manager.
RADIUS Events When checked, RADIUS authentication events are sent to the
manager.
PoE Events When checked, Power over Ethernet events are sent to the
manager.
RTP Events When checked, RTP events are sent to the manager.
L3 Events When checked, Layer 3 events are sent to the manager.
Link Events When checked, link events are sent to the manager.
Policy Events When checked, policy events are sent to the manager.
Eth Port Fault Events When checked, Ethernet port fault events are sent to the
manager.
Generic Events When checked, generic events are sent to the manager.
Table 66: Device Trap Managers Table (continued)
Item Description
3 of 3