Wireless AP-3 User's Guide

Parameter Tables
A-64 Avaya Wireless AP-3 User’s Guide
— DHCP Server Parameters - Enable or disable dynamic host
configuration
— Link Integrity Parameters - Monitor link status
• Interface Parameters - Configure Wireless and Ethernet settings
— Wireless Interface Parameters
— Wireless Distribution System (WDS) Parameters (802.11b
Only) - Configure the WDS partnerships
— Ethernet Interface Parameters - Set the speed and duplex of
the Ethernet port
• Management Parameters - Control access to the AP’s management
interfaces
— SNMP Parameters - Set read and read/write passwords
— HTTP (web browser) Parameters - Set up the graphical web
browser interface
— Telnet Parameters - Telnet Port setup
— Serial Port Parameters - Serial Port setup
— TFTP Server Parameters - Set up for file transfers; specify IP
Address, file name, and file type
— IP Access Table Parameters - Configure range of IP
addresses that can access the AP
• Filtering Parameters
— Ethernet Protocol Filtering Parameters - Control network traffic
based on protocol type